100% Secure Payments Visa, Mastercard Delivery Cost Will Change According to Postcode
Standard Delivery 2-3 working days |
100% Secure Payments Visa, Mastercard Delivery Cost Will Change According to Postcode
Standard Delivery 2-3 working days |
Egg Incubators / Hatcher Combined Systems
|
|
100% Secure Payments Visa, Mastercard Delivery Cost Will Change According to Postcode
Standard Delivery 2-3 working days |
100% Secure Payments Visa, Mastercard Delivery Cost Will Change According to Postcode
Standard Delivery 2-3 working days |
100% Secure Payments Visa, Mastercard Delivery Cost Will Change According to Postcode
Standard Delivery 2-3 working days |
Our Technology
|
|
All of these technologies are under international trademark and patent protection.
|
£6.90 |
© 2015 Crescentquail.TM Crescent Gamebird & Poultry Products Suppliers Ltd is Cimuka 's Only Main UK Distributor, All Rights Reserved. Company registration number 13774063
egg-incubators.co.uk new website is part of Crescent Gamebird & Poultry Products Suppliers Ltd
|
||||
|
The Large Cup Drinker is a full automatic drinker designed by Crescentquail to use old water tanks, buckets, feed and any other type of container turning them into reservoirs for your birds drinking water.
Pay less than the market price for your drinkers by converting your of 5lt / 10lt / 20lt / 30lt / 50lt / 100lt or more automatic drinkers into a water depot with the one you have. The flat surface is drilled into any tank. Their are no springs attached, it works with the force of water lifting the drinker, so it does not break down. It is easy to fit, maintain and use. Thanks to its buoyant structure, water is always automatically ready in the cup. Ideal for outside or indoor use, the Large Cup Drinker is hardwearing and suitable for All poultry and game and wild birds. Important note As all other watering systems, in extreme weather conditions frost can cause intolerance. As seen in the photo, in this watering system used the only metal is the nipple but all other components are made of plastic mould and is cold weather resistant, will not crack in the cold. Fitting Simply drill the water container with a 12mm (1/2") drill at a suitable height for your birds. Fit the Large Cup Drinker by removing the filter nut, place the Large Cup Drinker spigot through the hole leaving the washer on the outside and tighten down the nut until it forms a seal with the wall of the tank. Fill with water, check angle and retighten if necessary. Simply drill the water container with a 12mm (1/2") drill at a suitable height for your birds. Fit the Large Cup Drinker by removing the filter nut, place the Large Cup Drinker spigot through the hole leaving the washer on the outside and tighten down the nut until it forms a seal with the wall of the tank. Fill with water, check angle and retighten if necessary. |